1. Productfeature

• Parameter self-tuning, motor adaptive;
• Built in high subdivision, low vibration, low heat generation, and smooth low-speed operation;
• Medium and high-speed torque compensation;
• Current vector control, high current efficiency;
• Built in acceleration and deceleration control to improve smooth start stop performance;
• Motor operating position memory;
• Input signal differential optocoupler isolation, compatible with 5V~24V;
• Users can customize segmentation;
• Overcurrent protection, overvoltage protection;
• Automatic detection, flexible selection of pulse edge counting method;
• Green light indicates operation, red light indicates protection or offline;
• 
  

 2. Electrical indicators

three   Usage environment and parameters

status indicator

greenLEDFor the power indicator light, when the driver is powered on, theLEDAlways on; When the drive is powered off, theLEDExtinguish.

redLEDAs a fault indicator light, when a fault occurs, this indicator light willthreeFlashing in cycles of seconds; When the fault is eliminated by the user, redLEDConstant extinction. redLEDatthreeThe number of flashes per second represents different fault information, and the specific relationship is shown in the following table:

Common problems and troubleshooting

• 1. The power light is not on
• Input power failure, please check the power circuit Is the voltage too low
• 2. Power on, red light on, alarm
• Is the motor power phase line connected
• Is the input power voltage of the driver too high or too low 
• 3. Does not rotate after pulse input
• Is the wiring of the pulse input terminal of the driver reliable
• Is the input method in the drive system configuration related to pulse input
• Can the motor be released

Supported Motor Model: GR42HB40/GR42HB48/GR57HB56/GR57HB76/GR57HB80/GR60HB86/GR86HB118